VVDI2 Commander Key Programmer Full Version for VW/Audi/BMW/Porsche/PSA

Xhorse VVDI2 Commander Key Programmer Full Version

Note: Free active the  pin, cs, mac authorization and MQB Authoriztaion and English remote data base.
After receive the VVDI2, pls just give us serial number to active.

VVDI 2 Updated to V6.0.0

V6.0.0 Download link

For BMW:
VVDI2-Configuration FileV100.exe

Top 5 Reasons to Get VVDI 2

1. This VVDI2 comes with Basic Function + VW + AUDI Generation 5 function+ Porsche+BMW OBD Fucntion+BMW CAS4 function  
2. VVDI2 Covers All the Functions of VVDI, VVDI 5th IMMO Adapter, BMW Multi Tool, CAS4 Adapter, Most functions of Tango, J2534
3. Support VW, Audi, BMW and Porsche and remotes
4. Provide Exchange Service for Old VVDI,Item number: SV86-1
5. Newest Version: V6.0.0
6. Pls note VVDI2 FULL not include the vag 48 copy and BMW FEM authorization. Need to buy extrally if you need

VVDI2 - BMW FEM/BDC system(function released and available, just no user manual)
Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)

1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding

1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if 'get key info' the type not support, it will show:customer should use "BMW E-sys software" program FEM/BDC system.then programming FEM/BDC system with VVDI2-BMW
4.when operation on 'programming FEM/BDC system'interface,please don't close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.(FEM 95128 chip, BDC 95256 chip)usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car
or the car with window problem)please use "BMW E-sys software" coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.




I successfully added a key bcm2 on a 2013 audi a5.
2007 Audi A4 B7 RB8 crypto - mileage correction ok
Audi BCM2 add spare key by obd worked fine, and I did one on a 2013 A5 and it worked flawlessly.
A6/Q7 EZS Kessy: Added a dealer key (remote sourced from the dealer) without issues. Seemed to read everything properly but I had a working key to begin with.

Audi A6: Testet with A6 read kessy working, learned new key
Skoda Octavia 2006: got CS & PIN , programmed key fine, but not remote programming.
VW passat. B5: Pulled PIN, programmed key, corrected miles.
VW Passat B6 2009: Pulled PIN but couldn't get 6 bytes CS, needed comfort dump.
VW Transporter T5 2006 : Pulled PIN Programmed key, no remote programming.
Audi A4 2006 : mileage correction success .
Audi A6 2003: Mileage correction fail. car not start. remove battery terminal. car start.

VVDI2 Full Update Information:

VVDI2 Update to V6.0.0

*** 2018-10-26   
*** Require firmware V6.0.0 
===== VAG V6.0.0   =====
1. Immoprovement for autodetect VAG immobilizer system
2. Bugfix

===== BMW V6.0.0   =====
1. FEM/BDC system add support new verison: BDC 00002419_080_010_010
2. Bugfix

===== Porsche V6.0.0   =====
1. Bugfix

===== PSA V6.0.0   =====
1. Bugfix

===== Transponder Programmer V6.0.0 ===== 
1. Special Transponder - Support generate Toyota H transponder(128bit):
    a. Toyota H transponder - Camry, Levin
    b. Toyota H transponder - Corolla (First in the world!!!)
2. Support autodetect and read TIRIS DST AES(8A) transponder
3. Points System: Bugfix for verify remote bonus points function
4. Immobilizer data tool: TONGZHI immobilizer box support new type
5. Bugfix for copy chip 11 and 12.
6. Bugfix

===== Copy 48 (96 bits) V6.0.0  =====
1. Bugfix

===== J2534 V6.0.0   =====
1. Bugfix

===== Online Upate Tool V6.0.0  =====
1. Bugfix

===== Quick Start V6.0.0   =====
1. Bugfix

VVDI2 Update to V5.8.0

*** 2018-09-04

*** Require firmware V5.8.0
************************************************** **********************
===== VAG V5.8.0 =====
1. Bugfix for read PIN/CS from old touareg ECU, manually select type is: MED9.1 single
2. Bugfix for read PIN/CS from old Bentley ECU, manually select type is ME7 slaver
3. Immoprovement for autodetect VAG immobilizer system
4. Flash VAG firmware(frf, odx, sgo): support flash VAG firmware bigger than 300M, support flash virtual cockpit cluster
5. Bugfix

===== BMW V5.8.0 =====
1. FEM/BDC system add reset ECU lock(Usually used after exchange FEM/BDC)
2. Improvement for FEM/BDC key learning
3. Support read E-Series ECU synchronize code via OBDII: MEV9N46, MEV9N46L, N62_TUE, N62_TUE2, MS450DS0, MSS60, MSV70 etc
4. Bugfix

===== Porsche V5.8.0 =====
1. Bugfix

===== PSA V5.8.0 =====
1. Bugfix

===== Transponder Programmer V5.8.0 =====
1. Improvement for Rover/Jaguar(2015-) MC9S12EXT256/MC9S12EXQ384
2. Bugfix for new wireless remote
3. Immobilizer data tool: Bugfix for Euro->Peugeot->C1 24C04
4. Immobilizer data tool: Add support for Aisa->China Immobilizer box: JIAOTONG/LIANCHUANG/DELPHI/TONGZHI
5. Bugfix

===== Copy 48 (96 bits) V5.8.0 =====
1. Bugfix

===== J2534 V5.8.0 =====
1. Bugfix

===== Online Upate Tool V5.8.0 =====
1. Bugfix

===== Quick Start V5.8.0 =====
1. Bugfix

VVDI2 Update to V5.6.0

*** 2018-06-20
*** Requires firmware V5.5.0

===== VW V5.6.0 =====
1. Improve the automatic diagnosis of the public security system
2. Refresh the original firmware (frf, odx, sgo): Supports fast, medium, and slow 3 refresh modes
3. Other bug fixes

===== BMW V5.6.0 =====
1. Repair BMW FEM/BDC backup and recovery code, support to version ISTAP64.2
2. Other bug fixes

===== Porsche V5.6.0 =====
1. Other bug fixes

===== Peugeot Citroen V5.6.0 =====
1. Other bug fixes

===== Key Programmer V5.6.0 =====
1. Fix remote copy instability
2. Fix the issue of smart card generation
3. Add write startup: Europe -> Land Rover -> New Land Rover/Jaguar (2015-) MC9S12EXT256/MC9S12EXQ384
a. Need to load KVM/RFA DFLASH and EEPROM data
b. Support emergency start function, need to write back BCM DFLASH data
c. After the key is generated, write new data back to the KVM/RFA module. The new key is started directly. The remote control is intelligent and effective. No additional matching is required.
d. support to erase the lost key
4. Other bug fixes

===== 96-bit 48-copy V5.6.0 =====
1. Other bug fixes

===== J2534 V5.6.0 =====
1. Other bug fixes

===== Online Upgrade V5.6.0 =====
1. Other bug fixes

===== Quick Start V5.6.0 =====
1. Other bug fixes

KVM BCM Coverage 

VVDI2 Update to V5.5.0

*** 2018-05-15
*** Require firmware V5.5.0
************************************************* *********************
===== VAG V5.5.0 =====
1. Add support for 2012-2014 MQB(Continental/VDO) immobilizer and mileage. Support following cars:
a. VW Golf7 (2012-2014)
b. Skoda Octavia3 (2012-2014)
c. Audi A3 (2012-2014)
d. Seat Leon (2012-2014)
2. Bugfix for old bentely (2006 kline) key learning
3. Bugfix for flash VAG firmware(frf, odx, sgo)
4. Bugfix

===== BMW V5.5.0 =====
1. Add support for ISTAP63/64 FEM/BDC, support following version:
a. FEM 0000155E_016_114_020
b. FEM 0000155E_017_110_030
c. BDC 00002419_062_010_020
d. BDC 00002419_071_010_040
2. Bugfix for CAS4 file make key
3. Bugfix

===== Porsche V5.5.0 =====
1. Bugfix

===== PSA V5.5.0 =====
1. Bugfix

===== Transponder Programmer V5.5.0 =====
1. Add support for make proximity remotes – Prepare various proximity remotes with VVDI universal proximity remote(Require database version above 238)
2. Immobilizer data tool: bugfix for Euro->Fiat->Grand Punto 93C86
3. Immobilizer data tool: bugfix for Asia->Hyundai->Tiburon 2008 29F400
4. Immobilizer data tool: bugfix for Euro->Saab->9-3 1999 68HC05
5. Bugfix

===== Copy 48 (96 bits) V5.5.0 =====
1. Bugfix

===== J2534 V5.5.0 =====
1. Bugfix

===== Online Upate Tool V5.5.0 =====
1. Bugfix

===== Quick Start V5.5.0 =====
1. Bugfix

Write a review

Note: HTML is not translated!
    Bad           Good

For immobiliser and reomte control programming :

VVDI Tools , Keymaster DP, AVDI, Zed Full,AD100Pro, MVP Pro, SBB ,

Shipping Time:

1-3 business days for order processing after received the payment.
The shipping time is about 2 to 5 days via TNT and DHL, 15-30days via POST AIR to Worldwide
Note: We hope it arrive on time but since this is an international delivery, shipping time will be highly depended on the courier company and local customs/duties. Thank you for your understanding.

VVDI2 Commander Key Programmer Full Version for VW/Audi/BMW/Porsche/PSA

  • : 909
  • Product Code: XH.VVDI2
  • Availability: In Stock

For any questions please do not hesitate to contact us

    +90 533 375 70 70